Dental Denture Base Material Self Curing Color Resin Kit Acrylic Artificial Orthodontic Appliances
Dental Denture Base Material Self Curing Color Resin Kit Acrylic Artificial Orthodontic Appliances
Regular price
$128.00 USD
Regular price
Sale price
$128.00 USD
Unit price
/
per
Denture Base Material Self Curing Color Resin Kit
-High strength, great toughness, easy polishing.
-Good bendability and color stability.
-Great permeability, easy to operate.
-Ultrahigh molecular structure, low shrinkage.
-High quality raw materials, no air bubbles or impurities after curing.
Self Curing Color Resin Kit Feature:
-High strength, great toughness, easy polishing.
-Good bendability and color stability.
-Great permeability, easy to operate.
-Ultrahigh molecular structure, low shrinkage.
-High quality raw materials, no air bubbles or impurities after curing.
Self Curing Color Resin Kit Usage:
-Used to make full or partial denture base.
Self Curing Color Resin Kit Description:
-Shade: 0#, Pink, Blue, Green, Yellow
-Packaging: (5x100g Powder+3x100ml Liquid/Kit)
-Five empty bottle
-One Pipette
Methods of Use
Sprinkle Technique.
Apply a separating agent for denture base to a plaster model.
Perform preparation such as wax relief and fixing wires.
Sprinkle liquid onto the powder until basement is formed.
When the shine of the resin has disappeared, form the model using fingers.
When resin elasticity is felt, immerse in water at 40-50℃ (Placing in a pressure pot is recommended in order to minimize air bubble formation.)
Mixing Technique.
Measure appropriate amount of powder and liquid.
Put powder into liquid and mix using spatula or mixing stick.
Mix slowly to avoid air bubble formation. When the mix has turned into paste-like body, pour into model.
When the shine of the resin has disappeared, form the model using fingers.
Use Sprinkle Technique for narrow parts.
When resin elasticity is felt, immerse in water at 40-50℃ (Placing in a pressure pot is recommended in order to minimize air bubble formation.)
Resin Packing Technique.
Follow Mixing Technique for preparation.
When the resin reaches the doughy state, immediately pack into the flask.
Press the flask by hydraulic press until polymerization is complete (operate pressing before the curing process starts, refer to hardening time).
Brush On Technique.
Put appropriate amount of powder and liquid to their corresponding containers.
Wet the tip of the brush and dip into the powder.
Take desired amount of powder to suffice powder load.
Stack the load mixture until desired amount is achieved.
Let hard-polymerize.
Bigger brush is recommended for efficient results.
-High strength, great toughness, easy polishing.
-Good bendability and color stability.
-Great permeability, easy to operate.
-Ultrahigh molecular structure, low shrinkage.
-High quality raw materials, no air bubbles or impurities after curing.
Self Curing Color Resin Kit Feature:
-High strength, great toughness, easy polishing.
-Good bendability and color stability.
-Great permeability, easy to operate.
-Ultrahigh molecular structure, low shrinkage.
-High quality raw materials, no air bubbles or impurities after curing.
Self Curing Color Resin Kit Usage:
-Used to make full or partial denture base.
Self Curing Color Resin Kit Description:
-Shade: 0#, Pink, Blue, Green, Yellow
-Packaging: (5x100g Powder+3x100ml Liquid/Kit)
-Five empty bottle
-One Pipette
Methods of Use
Sprinkle Technique.
Apply a separating agent for denture base to a plaster model.
Perform preparation such as wax relief and fixing wires.
Sprinkle liquid onto the powder until basement is formed.
When the shine of the resin has disappeared, form the model using fingers.
When resin elasticity is felt, immerse in water at 40-50℃ (Placing in a pressure pot is recommended in order to minimize air bubble formation.)
Mixing Technique.
Measure appropriate amount of powder and liquid.
Put powder into liquid and mix using spatula or mixing stick.
Mix slowly to avoid air bubble formation. When the mix has turned into paste-like body, pour into model.
When the shine of the resin has disappeared, form the model using fingers.
Use Sprinkle Technique for narrow parts.
When resin elasticity is felt, immerse in water at 40-50℃ (Placing in a pressure pot is recommended in order to minimize air bubble formation.)
Resin Packing Technique.
Follow Mixing Technique for preparation.
When the resin reaches the doughy state, immediately pack into the flask.
Press the flask by hydraulic press until polymerization is complete (operate pressing before the curing process starts, refer to hardening time).
Brush On Technique.
Put appropriate amount of powder and liquid to their corresponding containers.
Wet the tip of the brush and dip into the powder.
Take desired amount of powder to suffice powder load.
Stack the load mixture until desired amount is achieved.
Let hard-polymerize.
Bigger brush is recommended for efficient results.